top of page

CEA Stainless steel threaded centrifugal pumps

2667-300x213.jpeg

Wide range of stainless steel pumps for domestic and industrial applications.

​

Available on request: “V” version with FPM seals for temperatures up to 110°C and “N” version completely made of AISI 316 stainless steel.

 

SPECIFICATIONS

 

  • Delivery: up to 31 m³/h

  • Head: up to 30 m

  • Power supply: both single and three-phase 50 and 60 Hz

  • Power: from 0.37 kW up to 3 kW

  • Maximum operating pressure: 8 bar

  • Temperature of pumped liquid: from -10 °C to 110 

​

Nominal Power

 

  • 0.37kW

  • 0.55kW

  • 0.75kW

  • 0.9kW

  • 1,1kW

  • 3.8kW

 

CO Threaded centrifugal pumps with open impeller

GCO-01.jpg

These pumps combine the advantages of an open impeller with those of the AISI 316 stainless steel construction, which is particularly suited for handling moderately aggressive liquids with suspended solids.

 

SPECIFICATIONS

 

  • Delivery: up to 54 m³/h

  • Head: up to 24 m

  • Power supply: both single and three-phase 50 and 60 Hz

  • Power: from 0.37 kW up to 3 kW

  • Maximum operating pressure: 8 bar

  • Temperature of pumped liquid: from -10 °C to 120 °C

  • Free passage: up to 20 mm

​

 

Nominal Power

 

  • 0.37kW

  • 0.55kW

  • 0.75kW

  • 0.9kW

  • 1,1kW

  • 1.5kW

 

e-SH Stainless steel 316 end suction pumps

e-SH-group-01.jpg

The Lowara e-SH series is a single impeller centrifugal pump made in AISI 316 stainless steel making it the right pump for moving water and aggressive liquids in a vast number of applications where high chemical resistance is needed.

 

HIGH EFFICIENCY AND LOW OPERATION COSTS

 

Newly designed high efficiency hydraulics with MEI values well above the ErP2015 level and IE3 motors set the basis for very low operation costs. Equipped with a Hydrovar variable speed pump controller, the duty is always exactly where it should be. And it pays off: reducing the speed by 50% reduces the power consumption by 85%.

 

EXACTLY THE RIGHT CONFIGURATION

Pump and impellers made in AISI 316 stainless steel with choice of mechanical seals/ motor options makes the e-SH is the right solution for 1000’s of liquids. The e-SH is WRAS approved for potable water use.
 

SPECIFICATIONS
 

  • Delivery: up to 240 m³/h

  • Head: up to 110 m

  • Power supply: three-phase 50 and 60 Hz

  • Power: from 0,25 kW up to 75 kW

  • Temperature of pumped liquid: from -10°C to +120°C

  • Extended temperature versions from -30°C to +120°C

Nominal Power

 

  • 32-160 2.2kW

  • 32-200 3kW

  • 40 - 160 4kW​

  • 40-200 5.5kW

  • 40-160 7.5kW

​

e-SH Stainless steel 316 end suction pumps

e-SH-group-01.jpg

The Lowara e-SH series is a single impeller centrifugal pump made in AISI 316 stainless steel making it the right pump for moving water and aggressive liquids in a vast number of applications where high chemical resistance is needed.

 

HIGH EFFICIENCY AND LOW OPERATION COSTS

 

Newly designed high efficiency hydraulics with MEI values well above the ErP2015 level and IE3 motors set the basis for very low operation costs. Equipped with a Hydrovar variable speed pump controller, the duty is always exactly where it should be. And it pays off: reducing the speed by 50% reduces the power consumption by 85%.

 

EXACTLY THE RIGHT CONFIGURATION

Pump and impellers made in AISI 316 stainless steel with choice of mechanical seals/ motor options makes the e-SH is the right solution for 1000’s of liquids. The e-SH is WRAS approved for potable water use.
 

SPECIFICATIONS
 

  • Delivery: up to 240 m³/h

  • Head: up to 110 m

  • Power supply: three-phase 50 and 60 Hz

  • Power: from 0,25 kW up to 75 kW

  • Temperature of pumped liquid: from -10°C to +120°C

  • Extended temperature versions from -30°C to +120°C

Nominal Power

​

  • SHE 32-160 2.2kW

  • SHE 32-200 3kW

  • SHE 40 - 160 4kW​

  • SHE 40-200 5.5kW

  • SHE 40-160 7.5kW

  • SHE 80-250​ 5.5kW

  • SHE 50-200 11kW

​

e-SV Stainless Steel Vertical Multi-stage Pumps

1PS_SV-01.jpg
e-svgroup_GWT-517x400.jpg

e-SV vertical multistage pump in stainless steel

 

The Lowara e-SV vertical multistage pump is a highly reliable and technologically advanced multipurpose pump. It’s capable of satisfying the needs of a wide variety of users and many different construction designs are available. The e-SV range feature models in eleven sizes  with 1-3-5-10-15-22-33-46-66-92-125 m³/h nominal capacities.

 

Design Features
 

  • Balanced mechanical seal replaceable with out need for pump disassembling (for 10-15-22SV>=5,5kW, 33-46-66-92-125SV)

  • “O” Ring seat design to allow for simple outer sleeve dis-assembly

  • Floating for self alignment replaceable diffuser wear ring (PPS Glass filled tecnopolymer to withstand chemically corrosive, mechanically aggressive and high temperature liquids)

  • Reduced impeller axial thrust for longer standard motor bearing life (17,500h)

  • Hard Material Intermediate bush bearing (Tungsten Carbide/Silicon Carbide) to improve life and ability to withstand heavy duty applications, like boiler feeding

  • High temperature seal option (180°C max) with low NPSH design, high pressure design (up to 40 Bar), and passivated & electro-polished versions are available upon request.

 

Further unique features of the e-SV include the integration of performance diagnostic devices such as the i-Alert™ vibration monitor and Dry Run sensor. The  i-Alert™ and the Dry Run sensor are available as an accessory for all models.

The e-SV is certified by WRAS, ACS and D.M. 174 for use with potable water.

 

Versions

  • e-SV: standard pump with IE3 motor

  • e-SVE: Variable speed Smart Pump with ultra premium efficiency IES2 drive package including a permanent magnet IE5 motor (up to 1,5 kW)

  • e-SVH: Variable speed pump with Hydrovar pump controller (up to 22 kW)​

​

Specifications
 

  • Delivery: up to 160 m³/h

  • Head: up to 330 m

  • Power supply: both single and three-phase 50 and 60 Hz

  • Power: from 0.37 kW up to 55 kW

  • Maximum operating pressure: 40 bar

  • Temperature of pumped liquid: from -30°C to 120°C (high temperature version up to 180°C available)

Nominal Power

 

  • 0.25kW

  • 0.37kW

  • 0.55kW

  • 0.76kW

  • 1.1kW

  • 1.5kW

  • 15kW

  • 18.5kW

  • 2.2kW

  • 22kW

  • 30kW

  • 37kW

  • 3kW

  • 45kW

  • 4kW

  • 5.5kW

  • 55kW

  • 7.5kW

​

e-HM Horizontal multistage centrifugal pumps

1PS_HM.jpg

The e-HM series is a modern, robust designed pump offering:

 

  • State-of-the-art hydraulics with best-in class efficiency combined with IE3 motors mean the lowest possible operating costs.

  • Thick sheet metal casing, high-quality bearings and stainless steel guarantees a long service life.

  • High-efficiency hydraulics, motor and thick sheet metal pump body keep the noise level to a minimum.

 

E-HM RESIDENTIAL:

  • Reliable water supply for most buildings; from family houses up to 10 floor apartment buildings. The e-HM is available in different versions

  • Bare pump

  • On/ off system with pressure switch and pressure tank

  • Semi constant pressure system with Genyo electronical pump controller

  • Constant pressure system with Resiboost variable speed controller

  • Constant pressure system; Smart Pump with ultra premium efficiency IES2 variable speed package including IE5 motor and communication with BMS systems

 

E-HM INDUSTRIAL:

  • Full offering for numerous applications including washing & cleaning, water treatment and food & beverage industries.

  • AISI 304 or 316

  • Electropolished

  • Compact and high efficiency versions

  • Mechanical face seal and o-ring options

  • The e-HM is certified by WRAS, ACS and D.M. 174 for use with potable water.

     

Specifications

  • Delivery: up to 29 m³/h

  • Head: up to 160 m

  • Power supply: both single and three-phase 50 and 60 Hz

  • Power: from 0.30 kW up to 5.50 kW

  • Maximum operating pressure: 16 bar

Nominal Power

 

  • 0.25kW

  • 0.37kW

  • 0.55kW

  • 0.76kW

  • 1.1kW

  • 1.5kW

  • 15kW

  • 18.5kW

  • 2.2kW

  • 22kW

  • 30kW

  • 37kW

  • 3kW

  • 45kW

  • 4kW

  • 5.5kW

  • 55kW

  • 7.5kW

​

DOC Submersible pumps for dirty pumps

DOC-group-300x400-01.jpg

Submersible pumps for drainage, infiltration water and emptying of pools, ponds, tanks and reservoirs. The DOC pump is mainly made of stainless steel and the motor has thermal overload protection which makes the DOC versatile, corrosion-resistant and compact. The single phase version has built in capacitor, level regulation and cable with a plug which enables fully automatic operation.

A shallow suction device is available enabling an almost complete drainage of flooded floors (down to 3 mm).

​

 

Three basic versions are available:

  • DOC with open impeller

  • DOC VX with vortex impeller giving 20 mm free passage for dirty water with solids

  • DOC GW with non-clogging magnetic float switch system for confined spaces

​

Specifications

  • Delivery: up to 14 m³/h

  • Head: up to 11 m

  • Power supply: both single and three-phase 50 and 60 Hz

  • Power: from 0,25 kW up to 0,55 kW

  • Temperature of pumped liquid: up to 40°C

  • Maximum immersion depth: 5 m

  • Free passage: up to 20 mm

Nominal Power

 

  • 0.25kW​

  • 0.55kW​

​

DIWA Submersible pumps for dirty pumps

diwa-172x300 (1).jpeg

Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power.
DIWA GT version with fixed vertical float switch system is also available.

 

Specifications

  • Delivery: up to 25 m³/h

  • Head: up to 21 m

  • Power supply: both single and three-phase 50 and 60 Hz

  • Power: from 0.55 kW up to 1.50 kW

  • Temperature of pumped liquid: to 50 °C

  • Maximum immersion depth: 7 m

  • Free passage: up to 8 mm

Nominal Power

 

  • 0.55kW

  • 0.75kW

  • 1.1kW

  • 1.5kW

​

bottom of page